a question for Jens Johansson
hello friends, i`m here now because i have a big big problem...the pitch bend from my synth (DX7s) is dead.
i can not move it any more. i need to change the potentiometer (10k with tap) for another but i cant find it.
maybe you know where can i find one or if can i put another pot with similar characteristics.
tack tack tack.
greetings from chile.
i saw Jens that you made another kind of pitch in your dx7...i dont know if that`s an option.
i can not move it any more. i need to change the potentiometer (10k with tap) for another but i cant find it.
maybe you know where can i find one or if can i put another pot with similar characteristics.
tack tack tack.
greetings from chile.
i saw Jens that you made another kind of pitch in your dx7...i dont know if that`s an option.
Re: a question for Jens Johansson
nothing????...
-
- Member
- Posts:121
- Joined:Tue Sep 08, 2009 10:12 pm
Re: a question for Jens Johansson
This is very, very bad....kikotr88 wrote:i`m here now because i have a big big problem...
Re: a question for Jens Johansson
yeeeesss myfriend...this situation`s got me "hanging by my balls"...
-
- Member
- Posts:121
- Joined:Tue Sep 08, 2009 10:12 pm
Re: a question for Jens Johansson
That is truly disgusting.kikotr88 wrote:yeeeesss myfriend...this situation`s got me "hanging by my balls"...
Re: a question for Jens Johansson
xD...i`m sorry but i can`t find the correct words to describe the situation...lalalal
-
- Member
- Posts:121
- Joined:Tue Sep 08, 2009 10:12 pm
Re: a question for Jens Johansson
Maybe you should just retire and sing in disney films.kikotr88 wrote:xD...i`m sorry but i can`t find the correct words to describe the situation...lalalal
- NeverendingAbyss
- Sr. Member
- Posts:4840
- Joined:Mon Sep 29, 2008 10:41 pm
- Location:Betty White will outlive the queen.
Re: a question for Jens Johansson
Ctrl+Z to undo this thread!
Re: a question for Jens Johansson
ahahahahaha...xD...here in chile i only could sing in the bus.
-
- Member
- Posts:121
- Joined:Tue Sep 08, 2009 10:12 pm
Re: a question for Jens Johansson
Maybe you should go back to your bus. It would be more peaceful there.kikotr88 wrote:ahahahahaha...xD...here in chile i only could sing in the bus.
I hope its a hybrid.
Re: a question for Jens Johansson
Even better, it's one that they push down the hill. Which is ok, in Chile they've no shortage of steep slopes.TimoToikki wrote:Maybe you should go back to your bus. It would be more peaceful there.kikotr88 wrote:ahahahahaha...xD...here in chile i only could sing in the bus.
I hope its a hybrid.
Getting uphill is the tricky part.
"Beneath the freezing sky arrives Winter's Verge..."
http://www.wintersverge.com
I'm going to hell, and loving the ride!
http://www.wintersverge.com
I'm going to hell, and loving the ride!
Re: a question for Jens Johansson
You're all jerks, I hope you know that.
Check the wiring.
Check the wiring.
Re: a question for Jens Johansson
this forum just keeps growing on you
Re: a question for Jens Johansson
Like my phallus!Carcass wrote:this forum just keeps growing on you
-P :viking:
PS: ditch the keyboard. Blow a horn.
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
Re: a question for Jens Johansson
I have 2 pots from my Frankensteined guitar....the exact ohm you need is 10k? And if you use a higher ohm, will it just draw the power it needs and not overload it? (they are a lot higher than 10k)
I used to work at an electronics store, and that's how it went I THINK...but anyway. I'm thinking there is a spring device in there too. Maybe the spring or springs are worn out. Or maybe, there is some sort of corrosion..It could be a lot of different little things. Take a picture of it all apart maybe?
I used to work at an electronics store, and that's how it went I THINK...but anyway. I'm thinking there is a spring device in there too. Maybe the spring or springs are worn out. Or maybe, there is some sort of corrosion..It could be a lot of different little things. Take a picture of it all apart maybe?
Re: a question for Jens Johansson
there is a picture.
i think that i can use only a 10k potentiometer...i know the reason but my english is not good and i cant write that.
maybe i`m wrong
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
Re: a question for Jens Johansson
A lot of times with old electronics it's easier to buy a whole new one instead of fixing it if it's on it's last leg. But, the keyboard may have a special place in your collection..or else you don't have a replacement to play in the mean time or the money.
It might just be a little fix that all it needs too.
Try out some ideas and if it blows up, you know that it doesn't work!!!!!
Better than just having it sit around right?
It might just be a little fix that all it needs too.
Try out some ideas and if it blows up, you know that it doesn't work!!!!!
Better than just having it sit around right?
Re: a question for Jens Johansson
well, the picture is quite blurry and I don't know that much about electronics, however, nothing looks externally wrong with it. Do you live near a Radio Shack or a similar electronics store? Sometimes places like that can take the individual part and either A. find another one or B. repair it. Musician stores are usually useless, but electronic places can be useful.
Search around online stores as well.
Search around online stores as well.
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
Re: a question for Jens Johansson
radioshack in chile? doubt it
- NeverendingAbyss
- Sr. Member
- Posts:4840
- Joined:Mon Sep 29, 2008 10:41 pm
- Location:Betty White will outlive the queen.
Re: a question for Jens Johansson
There are Starbucks, though.robocop656 wrote:radioshack in chile? doubt it
_____
Sometimes I think this forum is one big Asperger Syndrome convention.
Re: a question for Jens Johansson
i have been looking for the pot. in all electronic stores in santiago, in san diego too and i found nothing, i took the pot. to te electronic stores and they told me that they can`t do any thing to help me...
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
Re: a question for Jens Johansson
Radioshack stores are HELL. That's where I worked. Chile is better off without them. Starbucks?? Gawd damn hippies.
If none of the electronics stores can help you, the best thing to do is google.
They are cheap by the way.
If none of the electronics stores can help you, the best thing to do is google.
They are cheap by the way.
Re: a question for Jens Johansson
ahahha belive me my friend...google didn`t help me too.
that`s the reason why i`m here trying to talk with Jens Johansson. DX7 master.
that`s the reason why i`m here trying to talk with Jens Johansson. DX7 master.
Re: a question for Jens Johansson
and your pic is so funnye dude xD
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
Re: a question for Jens Johansson
These ones on Ebay don't have 4 contacts...hm??
Have you tried keyboard forums? DX7 owners manual? Other musician forums? One of those might work
Have you tried keyboard forums? DX7 owners manual? Other musician forums? One of those might work
Re: a question for Jens Johansson
ok, thanx dude, i`m investigating about those pots, but my question is:
what`s the diference between my potentiometer with four terminals and those that you send me ( with three terminals )
what`s the diference between my potentiometer with four terminals and those that you send me ( with three terminals )
- robocop656
- Sr. Member
- Posts:2312
- Joined:Mon Feb 16, 2009 6:04 pm
- Location:pæniš
- Contact:
Re: a question for Jens Johansson
I'm thinking the 4 terminals has to be connected to 4 parts on the circuit board. One is the ground wire, 3 are power maybe?
And the 3 terminal one- you can use the 3 terminals for power and solder a wire to the metal on the back of the pot to ground it.
And the 3 terminal one- you can use the 3 terminals for power and solder a wire to the metal on the back of the pot to ground it.